Product Description
Adam Equipment GC Indicator SmartCable™ Gage Interface Cable
Send data directly to Excel - no software wedge required
This Advanced Systems & Designs SmartCable™ USB Keyboard single-gage interface connects the Adam Equipment GC Counting Indicator to a computer. Connects the Adam Equipment GC Indicator to the SmartCable™ Keyboard gage interface using a 9-pin male cable connector---no additional cables required. The output of the SmartCable™ Keyboard is a standard USB 2.0 keyboard signal.
Connecting the SmartCable™ Keyboard with its built-in keyboard wedge to a computer will allow the Adam Equipment GC Counting Indicator to be identified as a keyboard device that can send data to any Microsoft Windows application - no software wedge required.
This SmartCable™ Keyboard gage interface will make the Adam Equipment GC indicator digital readings appear as if they were typed in using a standard keyboard - eliminates data collection errors. If you want to collect data into a Microsoft Excel spreadsheet or Explorer based SPC software programs, simply select the data cell where you want the data to appear.
Readings can be triggered by any of the following:
-
Pressing the push button on the SmartCable™ Keyboard gage interface
-
Depressing a connected footswitch (not included)
-
Pressing the print button on the Adam Equipment GC Counting Indicator
Simple to set-up, simple to use!
LED Indicator lights aid the user with the operation of the SmartCable™ Keyboard gage interface. This SmartCable™ Keyboard is easily configured to output data in different output modes on your spreadsheet, such as CR, TAB, up, down, left, or right. The output mode is selected by adjusting the rotary switch on the SmartCable™ Keyboard. To access the rotary switch, simply remove the top cover by loosening two Phillips screws.
A detailed operation manual is included with this SmartCable™ Keyboard gage interface. Advanced Systems & Designs normally sets the SmartCable™ Keyboard to the default settings on the Adam Equipment GC Counting Indicator bi-directional RS232 interface. Make sure both the SmartCable™ and Adam Equipment Counting Indicator are set to the same values. Refer to the Adam Equipment GC Series Counting Indicator user manual for more information on external communication.
Six foot standard cable length. Special lengths readily available upon request.
Details
-
SmartCable™ Keyboard for Adam Equipment GC Series Counting Indicator
-
Sends data to Excel or other Explorer based SPC Programs
-
Multiple data triggering options
-
Special cable lengths available on request
-
Lifetime warranty against manufacturing defects
