Product Description
Mitutoyo Gage with 10-pin Plain Connector SmartCable™ USB Interface
Sends data to SPC data collection programs
The Mitutoyo Gage with 10-pin Plain Connector (see below for applicable gages) is connected to the SmartCable™ USB gage interface using the standard gage connector. This SmartCable™ USB gage interface connects the Mitutoyo Gage to the USB port on the computer. This Advanced Systems & Designs SmartCable™ USB will allow the Mitutoyo Gage to send inspection data as a COM port (or virtual Com Port) to communication and terminal emulation programs (i.e. HyperTerminal) or any SPC data collection software program.
NOTE: This SmartCable™ USB gage interface will NOT send data directly to a spreadsheet program such as Excel without using a separate software wedge. Please see our SmartCable™ Keyboard (600-440-KB-USB) gage interface if you want to send data directly to Excel.
The output of the SmartCable™ USB gage interface is a standard USB 2.0 COM port signal and the USB connection provides power to the interface. The Mitutoyo 500 Series Gage cannot obtain power from the SmartCable™ USB---the gage requires a separate power supply (batteries) of its own.
Readings can be triggered by any of the following:
-
Pressing the button on the SmartCable™ USB gage interface.
-
Depressing a connected footswitch (not included)
- Pressing a data send button on the gage, if it has one
-
Sending a gage read command from the external computer to the SmartCable™ USB gage interface
This SmartCable™ USB gage interface is capable of sending data in several modes: read only, continuous, continuous with delay, disable pushbutton, and others. A detailed operation manual is included with this Advanced Systems and Designs SmartCable™ USB gage interface.
Lifetime warranty against manufacturing defects. Standard six foot cable length. All of our SmartCable™ USB gage interfaces are also available in custom lengths upon request.
Applicable Mitutoyo Digital Gages:
-
Laser Scan Micrometer 543 Series
-
Indicators: 543-5XX
-
MU-Checkers: 519-4XX, 519-621A
-
MU-Gages: 179-207, 179-208
-
Displays: 542-022-5A, 542-032-5A, 542-036-5A, 572-011A, 572-031A
-
Linear Height: 518-314A, 518-315A
-
Litematic: 318-202A, 318-204A
-
Heightmatic: 57X Series
-
Digi Derm: 179-7XX
-
Hardness Tester: Micro Hardness Type
Features:
-
SmartCable™ USB interface for Mitutoyo Gage with 10-pin Plain Connector
-
Sends data to SPC data collection programs
-
Multiple data triggering options
-
Special cable lengths also available
-
Lifetime warranty against manufacturing defects
