Product Description
Mark-10 Series CTA Cap Torque Tester SmartCable™ Gage Interface
Send data directly to Excel---No Software Wedge Required
The Advanced Systems and Designs (ASDQMS) gage interface with keyboard output sends data directly to Microsoft Excel, Explorer-based SPC programs, or other spreadsheet programs without using complicated software wedges. This Advanced Systems & Designs SmartCable™ USB Keyboard single gage interface connects the Mark-10 Series CTA Cap Torque Tester to a computer using a 9-pin female cable connector---no additional cables required. The output of the SmartCable™ Keyboard is a standard USB 2.0 keyboard signal.
Connecting the SmartCable™ Keyboard with its built-in keyboard wedge will allow the SmartCable™ gage interface to be identified as a keyboard device that can send data to any Microsoft Windows application - no software wedge required. The SmartCable™ Keyboard gage interface will make the Mark-10 Series CTA Cap Torque Tester readings appear as if they were typed in using a standard keyboard - eliminates data collection errors. If you want to collect data into a Microsoft Excel spreadsheet, simply select the cell where you want the data to appear.
Readings can be triggered by the following:
-
Pressing the DATA key on the Mark-10 Series CTA Cap Torque Tester
-
Pressing the button on the SmartCable Keyboard gage interface
-
Depressing a connected footswitch (not included)
LED Indicator lights aid the user with the operation of the SmartCable™ gage interface. This SmartCable™ Keyboard is easily configured to output data in different output modes on your spreadsheet, such as CR, TAB, up, down, left, or right. The output mode is selected by adjusting the rotary switch on the SmartCable™ Keyboard gage interface. To access the rotary switch, simply remove the top cover by loosening two Phillips screws.
Six foot standard cable length with special lengths available on request.
A detailed operation manual is included with this SmartCable™ Keyboard gage interface. The communication parameters can be changed and reconfigured per requirements for both the SmartCable™ and the Mark-10 Series CTA Cap Torque Tester. Advanced Systems & Designs normally sets the SmartCable™ Keyboard to the default settings on the Mark-10 Cap Torque Tester. Make sure both the SmartCable™ gage interface and Mark-10 Cap Torque Tester are set to the same values. Refer to the Mark-10 Series CTA Cap Torque Tester user guide for more information on external communication.
Details:
-
SmartCable™ Keyboard gage interface for Mark-10 Series CTA Cap Torque Tester
-
Sends data to Excel or other Explorer based SPC programs
-
Multiple data triggering options
-
Special cable lengths available on request
-
Lifetime warranty against manufacturing defects
