Product Description
Sartorius Signum Series Compact Scale FlashCable® Gage Interface
Send data to our GageMux® gage interface or other Digimatic input devices
This Advanced Systems and Designs - ASDQMS FlashCable® gage interface is designed to change the output on the Sartorius Signum Compact Scale to an output in Digimatic format. The RS232 DB25 male connector on the Advanced Systems & Designs FlashCable® gage interface connects directly to the DB25 female connector on the Sartorius Signum Scale.
This FlashCable® gage interface is engineered to work with our GageMux® multiple-input gage interface or similar devices that recognize the Mitutoyo Digimatic signal. It does not obtain any power from the gage.
When connected to the GageMux® gage interface, pin 9 of the 10-pin input port provides the power to the FlashCable® gage interface. On Digimatic interfaces other than the GageMux®, pin 9 of the 10-pin connector needs to provide 5v DC power to the FlashCable® gage interface.
The LED on the FlashCable® gage interface will turn GREEN to indicate that the FlashCable® is connected properly. The LED flashes RED when the data is being sent from the Sartorius Signum Scale. Six foot standard cable length with special lengths available on request.
The data transfer can be triggered using any of the following methods:
-
Using the Data Output button on the Sartorius Signum Scale
-
Using our 300-1S in-line handswitch
-
Using a footswitch on the FlashCable® (not included)
-
Using the footswitch on the GageMux® USB or similar triggering method
-
Sending a gage read command from the computer to the Sartorius Scale
Lifetime warranty against manufacturing defects. A detailed operation manual is included with this FlashCable® gage interface.
Advanced Systems & Designs normally sets the ASDQMS FlashCable® Digimatic gage interface at the factory to the default settings for the Sartorius Signum Compact Scale. To insure proper communication both the Sartorius Signum Scale and FlashCable® Digimatic gage interface must be set to the same values. Refer to the Sartorius Signum Compact Scale operating instructions for more information on external communication.
Details:
-
Digimatic output FlashCable® interface for Sartorius Signum Series Compact Scale
-
Sends data to GageMux® or other devices that recognize the Digimatic signal
-
Several options to trigger data
-
Special cable lengths available on request
-
Lifetime warranty against manufacturing defects
