Product Description
Sartorius AZ313, M-POWER Series Balance FlashCable® Gage Interface
Send data to our GageMux® gage interface or other Digimatic input devices
This FlashCable® gage interface is engineered to change the output on the Sartorius AZ313, M-POWER Series milligram balance to an output in a digimatic format. The special 25-Pin male connector on the Advanced Systems & Designs FlashCable® connects directly to the 25-Pin female connector on the Sartorius AZ313, M-POWER Balance. Designed to work with our GageMux® gage interface or other similar devices that recognize the Mitutoyo Digimatic signal.
The FlashCable® does not obtain any power from the gage. When connected to the GageMux®, pin 9 of the 10-pin input port provides the power to the FlashCable® gage interface. If using devices, other than the GageMux®, make sure pin 9 of the 10-pin connector provides a 5VDC supply to theFlashCable®. When the FlashCable® is connected to the GageMux®, the LED on the FlashCable® turns GREEN. This indicates that the FlashCable® is connected properly. The LED turns RED when the data is being sent or a data request is triggered.
The data transfer can be triggered using any of the following methods:
-
Using the data send button on the Sartorius AZ313, M-POWER Series (if it has one)
-
Using our 300-1S in-line handswitch
-
Using a footswitch on the FlashCable® (not included)
-
Using the footswitch on the GageMux® USB (or equivalent triggering method on similar devices)
-
Sending a gage read command from the computer to the gage
A detailed operation manual is included with this FlashCable® gage interface. The communication parameters can be changed and reconfigured per requirements for both the FlashCable® and the Sartorius AZ313, M-POWER Series. Advanced Systems & Designs normally sets the FlashCable® to the default settings on the Sartorius AZ313, M-POWER Series. Make sure both the Sartorius AZ313, M-POWER Series and FlashCable® gage interface are set to the same values. Refer to the Sartorius AZ313, M-POWER Series user manual for more information on external communication. Use the GageMux® USB manual to see the reconfiguration instructions.
Six foot standard cable length with special lengths available upon request.
Details:
-
Digimatic output FlashCable® for Sartorius AZ313, M-POWER Series
-
Sends data to GageMux® or devices that recognize the Digimatic Signal
-
Several options to trigger data
-
Special cable lengths available on request
-
Lifetime warranty against manufacturing defects
