Toggle menu
800-939-9934
  • ASDQMS FlashCable® with Digimatic Output for A&D GF Series Precision Balance

    • Digimatic Output FlashCable® for A&D Engineering GF Series Balance

    $169.00
    Write a Review
    SKU:
    600-22-ANDGF300-MTI
    Condition:
    New
    Availability:
    Usually ships in 5 days

    Product Description

    A&D GF Series Balance FlashCable® Gage Interface Cable

    Send data to our GageMux® or other Digimatic devices

    This Advanced Systems and Designs FlashCable® gage interface is engineered to change the output on the A&D Engineering GF Series Precision Balance to an output in a Digimatic format (including the GF-200, 300, 400, 600, 800, 1000, 1200, 2000, 3000, 4000, 6100, 6000, & 8000 Precision Balances). Our FlashCable® gage interface quickly adapts to work with the speedy response time of the A & D GF Series Balances.The Advanced Systems & Designs FlashCable® Digimatic gage interface connects directly to the 25-Pin female connector on the A&D GF Series Precision Balance. All of our Digimatic output FlashCable® gage interfaces are designed to work with our GageMux® gage interface or other similar devices that recognize the Mitutoyo Digimatic signal.

    When connected to the GageMux® gage interface, pin 9 on the 10-pin Digimatic input port provides the power to the FlashCable®. If using devices, other than the GageMux®, make sure pin 9 of the 10-pin connector provides a 5vDC supply to theFlashCable® gage interface. When the FlashCable® interface is properly connected to the GageMux®, the LED on the FlashCable® turns GREEN to indicate that the FlashCable® gage interface is peroperly connected. The LED turns RED when the data is being sent or a data request is triggered.

    The data transfer can be triggered using any of the following methods:

    • Using the PRINT key on the GF Series Precision Balance
    • Using our 300-1S in-line handswitch
    • Using a Footswitch on the FlashCable® (not included)
    • Using the Footswitch on the GageMux® USB (or equivalent triggering method on similar devices
    • Sending a gage read command from the computer to the gage

    A detailed operation manual is included with this FlashCable® gage interface. The communication parameters can be changed and reconfigured per requirements for both the FlashCable® gage interface and the A&D Engineering GF Precision Balance. Advanced Systems & Designs normally sets the FlashCable® to the default settings on the A&D GF300 Precision Balance. Make sure both the A&D Precision Balance and the FlashCable® gage interface are set to the same values. Refer to the A&D GF Series Precision Balance user manual for more information on external communication.

    Six foot cable length. Special lengths available upon request.

    Features:

    • Digimatic output FlashCable® interfce for A & D GF Series Balance

    • Sends data to GageMux® or devices that recognize the Digimatic signal

    • Several options to trigger data

    • Special cable lengths available on request. Contact us for more information.

    • Lifetime warranty against manufacturing defects

    Product Videos

    Custom Field

    Product Reviews

    Write a Review