Product Description
Vibra Tuning Fork Balance Digimatic Interface Cable
Send data to our GageMux® gage interface or other Digimatic input devices
This FlashCable® gage interface is a engineered to change the output on the Shinko Denshi Vibra Tuning Fork Analytical Balance to an output in a Digimatic format. The 5-pin DIN male connector on the Advanced Systems & Designs FlashCable® connects directly to the 5-Pin female connector on the Vibra Tuning Fork Electronic Balance.
Designed to work with our GageMux® gage interface or other similar devices that recognize the Mitutoyo Digimatic signal. The FlashCable® does not obtain any power from the gage. When connected to the GageMux®, pin 9 of the 10-pin input port provides the power to the FlashCable® gage interface. If using devices, other than the GageMux®, make sure pin 9 of the 10-pin connector provides a 5VDC supply to the FlashCable®. When the FlashCable® is connected to the GageMux®, the LED on the FlashCable® turns GREEN. This indicates that the FlashCable® is connected properly. The LED turns RED when the data is being sent or a data request is triggered.
The data transfer can be triggered using any of the following methods:
-
Using the data send button on the Vibra Tuning Fork Balance (if it has one)
-
Using our 300-1S in-line handswitch
-
Using a Footswitch on the FlashCable® (not included)
-
Using the Footswitch on the GageMux® USB (or equivalent triggering method on similar devices)
-
Sending a gage read command from the computer to the Vibra Tuning Fork Balance
A detailed operation manual is included with this FlashCable® gage interface. The communication parameters can be changed and reconfigured per requirements for both the FlashCable® and the Vibra Tuning Fork Analytical Balance. Advanced Systems & Designs normally sets the FlashCable® to the default settings on the Vibra Tuning Fork Analytical Balance. Make sure both the Vibra Tuning Fork Balance and FlashCable® gage interface are set to the same values. Refer to the Shinko Denshi Vibra Tuning Fork Electronic Balance user manual for more information on external communication.
Six foot standard cable length with special lengths available upon request.
Details:
-
Digimatic output FlashCable® for Shinko Denshi Vibra Tuning Fork Analytical Balance
-
Sends data to GageMux® or devices that recognize the Digimatic Signal
-
Several options to trigger data
-
Special cable lengths available on request
-
Lifetime warranty against manufacturing defects
