Product Description
Starrett DFG Force Gage Digimatic Interface Cable
Send data to our GageMux® gage interface or other Digimatic input devices
This FlashCable® gage interface is engineered to convert the output on the Starrett DFG Digital Force Gage to a Digimatic format. The 9-pin female connector on this Advanced Systems & Designs FlashCable® connects directly to the RS-232C male interface cable connector on the Starrett Force Gage.
NOTE: In order to make the proper connection, this FlashCable must be used with the Starrett L1-RS232 Serial I/O cable, not included.
This FlashCable® gage interface is designed to work with our GageMux® multiple input gage interface or other similar devices that recognize the Mitutoyo Digimatic signal. The FlashCable® does not obtain any power from the Starrett Force Gage. When properly connected to our GageMux® interface, pin 9 of the 10-pin input port provides the power to the FlashCable® gage interface. On devices other than the GageMux®, pin 9 of the input port connector must provide a 5vDC power to the FlashCable®.
When the FlashCable® gage interface is powered by the GageMux® the LED on the FlashCable® turns solid GREEN. The LED briefly flashes RED when the data is being sent or a data request is triggered.
The data transfer can be triggered by the following method:
-
Using the softkey 1 “send” button on the Starrett DFG Digital Force Gage
A detailed operation manual is included with this FlashCable® gage interface. The Starrett DFG Digital Force Gage and FlashCable® gage interface must be set to the same RS232 communication values. Refer to the Starrett DFG Digital Force Gage user manual for more information on how to set-up external communication using the RS-232C interface.
Lifetime warranty against manufacturing defects. This FlashCable® gage interface comes in a six foot standard cable length. Special lengths are available upon request. Contact us for more information.
Details:
-
Digimatic output FlashCable® interface cable for the Starrett DFG Digital Force Gage
-
Uses the enter / send data button on the Starrett DFG Digital Force Gage to send data
-
Sends data to GageMux® gage interface or other devices that recognize the Digimatic signal
-
Special cable lengths available on request
-
Lifetime warranty against manufacturing defects
