Product Description
Shimadzu MOC63u Moisture Analyzer Digimatic Interface Cable
Send data to our GageMux® gage interface or other Digimatic input devices
This ASDQMS FlashCable® gage interface is a engineered to change the output on the Shimadzu MOC63u Moisture Analyzer to an output in a Digimatic format. The 9-pin male connector on the Advanced Systems & Designs FlashCable® connects directly to the 9-Pin female connector on the Shimadzu MOC63u Moisture Analyzer.
Designed to work with our GageMux® gage interface or other similar devices that recognize the Mitutoyo Digimatic signal. The FlashCable® does not obtain any power from the gage. When connected to the GageMux®, pin 9 of the 10-pin input port provides the power to the FlashCable® gage interface. If using devices, other than the GageMux®, make sure pin 9 of the 10-pin connector provides a 5VDC supply to theFlashCable®. When the FlashCable® is connected to the GageMux®, the LED on the FlashCable® turns GREEN. This indicates that the FlashCable® is connected properly. The LED turns RED when the data is being sent or a data request is triggered.
The data transfer can be triggered using any of the following methods:
-
Using the data send button on the Shimadzu MOC63u Moisture Analyzer (if it has one)
-
Using our 300-1S in-line handswitch
-
Using a Footswitch on the FlashCable® (not included)
-
Using the Footswitch on the GageMux® USB (or equivalent triggering method on similar devices)
-
Sending a gage read command from the computer to the Shimadzu MOC63u Moisture Analyzer
A detailed operation manual is included with this FlashCable® gage interface. The communication parameters can be changed and reconfigured per requirements for both the FlashCable® and the Shimadzu Moisture Analyzer. Advanced Systems & Designs normally sets the FlashCable® to the default settings on the Shimadzu MOC63u Moisture Analyzer. Make sure both the Shimadzu MOC63u Moisture Analyzer and FlashCable® gage interface are set to the same values. Refer to the Shimadzu MOC63u Moisture Analyzer user manual for more information on external communication.
Six foot standard cable length with special lengths available upon request.
Details:
-
Digimatic output FlashCable® for Shimadzu MOC63u Moisture Analyzer
-
Sends data to GageMux® or devices that recognize the Digimatic Signal
-
Several options to trigger data
-
Special cable lengths available on request
-
Lifetime warranty against manufacturing defects
