Product Description
Precisa LX or LS Precision Electronic Balance Digimatic FlashCable®
Send data to our GageMux® gage interface or other Digimatic input devices
This Advanced Systems and Designs - ASDQMS FlashCable® gage interface is a engineered to change the output on the Precisa LX or LS Precision Electronic Balance to an output in a Digimatic format. The 9-pin male connector on the Advanced Systems & Designs FlashCable® connects directly to the 9-Pin female connector on the Precisa LX or LS Series Precision Electronic Balance.
Designed to work with our GageMux® gage interface or other similar devices that recognize the Mitutoyo Digimatic signal. The Advanced Systems and Designs FlashCable® does not obtain any power from the gage. When connected to the ASDQMS GageMux®, pin 9 of the 10-pin input port provides the power to the FlashCable® gage interface. If using devices, other than the GageMux®, make sure pin 9 of the 10-pin connector provides a 5VDC supply to the FlashCable®. When the FlashCable® is connected to the GageMux®, the LED on the FlashCable® turns GREEN. This indicates that the FlashCable® is connected properly. The LED turns RED when the data is being sent or a data request is triggered.
The data transfer can be triggered using any of the following methods:
-
Using the Print button on the Precisa LX or LS Series Precision Electronic Balance
-
Using our 300-1S in-line handswitch
-
Using a Footswitch on the FlashCable® (not included)
-
Using the Footswitch on the GageMux® USB (or equivalent triggering method on similar devices)
-
Sending a gage read command from the computer to the gage
A detailed operation manual is included with this ASDQMS FlashCable® gage interface. Advanced Systems & Designs normally sets the FlashCable® to the default settings on the Precisa LX or LS Series Precision Electronic Balance. Make sure both the Precisa LX or LS Series Precision Electronic Balance and FlashCable® gage interface are set to the same values. Refer to the Precisa LX or LS Series Precision Electronic Balance Operating Instructions for more information on external communication.
Six foot standard cable length with special lengths available upon request.
Details:
-
Digimatic output FlashCable® for Precisa LX or LS Series Precision Electronic Balance
-
Sends data to GageMux® or devices that recognize the Digimatic Signal
-
Several options to trigger data
-
Special cable lengths available on request
-
Lifetime warranty against manufacturing defects
