Toggle menu
800-939-9934
  • ASDQMS FlashCable® for Olympus MagnaMike 8600 Thickness Gage

    • Digimatic FlashCable® for Olympus MagnaMike 8600 Thickness Gage

    $169.00
    Write a Review
    SKU:
    600-22-MM8600-MTI
    Condition:
    New
    Availability:
    Usually ships in 5 days
    Width:
    10.00 (in)
    Height:
    7.00 (in)
    Depth:
    3.00 (in)

    Product Description

    Olympus MagnaMike 8600 Thickness GageDigimatic FlashCable®

    Send data to our GageMux® gage interface or other Digimatic input devices

    This FlashCable® gage interface is a engineered to change the output on the Olympus MagnaMike 8600 Thickness Gage to an output in a digimatic format. The 9-pin male connector on the Advanced Systems & Designs FlashCable® connects directly to the 9-Pin female connector on the Olympus MagnaMike 8600 Thickness Gage. 
    Designed to work with our GageMux® gage interface or other similar devices that recognize the Mitutoyo Digimatic signal. The FlashCable® does not obtain any power from the gage. When connected to the GageMux®, pin 9 of the 10-pin input port provides the power to the FlashCable® gage interface. If using devices, other than the GageMux®, make sure pin 9 of the 10-pin connector provides a 5VDC supply to theFlashCable®. When the FlashCable® is connected to the GageMux®, the LED on the FlashCable® turns GREEN. This indicates that the FlashCable® is connected properly. The LED turns RED when the data is being sent or a data request is triggered.

    The data transfer can be triggered using any of the following methods:

    • Using the data send button on the Olympus MagnaMike 8600 Thickness Gage (if it has one)

    • Using our 300-1S in-line handswitch

    • Using a Footswitch on the FlashCable® (not included)

    • Using the Footswitch on the GageMux® USB (or equivalent triggering method on similar devices)

    • Sending a gage read command from the computer to the gage

    A detailed operation manual is included with this FlashCable® gage interface. The communication parameters can be changed and reconfigured per requirements for both the FlashCable® and the Olympus MagnaMike 8600 Thickness Gage. Advanced Systems & Designs normally sets the FlashCable® to the default settings on the Olympus MagnaMike. Make sure both the Olympus MagnaMike 8600 Thickness Gage and FlashCable® gage interface are set to the same values. Refer to the Olympus MagnaMike user manual for more information on external communication. Use the GageMux® USB manual to see the reconfiguration instructions.

    Six foot standard cable length with special lengths available upon request.

    Details:

    • Digimatic output FlashCable® for Olympus MagnaMike 8600 Thickness Gage

    • Sends data to GageMux® or devices that recognize the Digimatic Signal

    • Several options to trigger data

    • Special cable lengths available on request

    • Lifetime warranty against manufacturing defects

    Product Videos

    Custom Field

    Product Reviews

    Write a Review