Product Description
Mettler Toledo ME Model New Classic Analytical Balance Digimatic FlashCable®
Send data to our GageMux® multi-input gage interface
This FlashCable® gage interface is engineered to change the output on the Mettler Toledo ME Analytical Balance to an output in a Digimatic format. The 9-pin male connector on the ASDQMS Advanced Systems & Designs FlashCable® interface cable connects directly to the 9-Pin female connector on the Mettler Toledo ME New Classic Analytical Balance.
Designed to work with our GageMux® universal gage interface or other similar devices that recognize the Mitutoyo Digimatic signal. The FlashCable® does not obtain any power from the gage. When connected to the GageMux®, pin 9 of the 10-pin input port provides the power to the FlashCable® gage interface. If using devices, other than the GageMux®, make sure pin 9 of the 10-pin connector provides a 5vDC supply to the FlashCable® interface.
When the FlashCable® is connected to the GageMux®, the LED on the FlashCable® turns GREEN. This indicates that the FlashCable® is connected properly. The LED turns RED when the data is being sent or a data request is triggered.
The data transfer can be triggered using any of the following methods:
-
Using the PRINT button on the Mettler Toledo ME Model Analytical Balance
-
Using our 300-1S in-line handswitch
-
Using a Footswitch on the FlashCable® (not included)
-
Using the Footswitch on the GageMux® USB (or equivalent triggering method on similar devices)
-
Sending a gage read command from the computer to the gage
A detailed operation manual is included with this FlashCable® gage interface. Advanced Systems & Designs normally sets the FlashCable® interface cable to the default settings on the Mettler Toledo ME Analytical Balance. Make sure both the Mettler Toledo ME Series Balance and FlashCable® gage interface are set to the same values. Refer to the Mettler Toledo ME Series New Classic Analytical Balance operating instructions for more information on external communication.
Six foot standard cable length - special lengths available upon request.
Details:
-
Digimatic output FlashCable® for Mettler Toledo ME Series New Classic Balance
-
Sends data to GageMux® or devices that recognize the Digimatic Signal
-
Several options to trigger data
-
Special cable lengths available on request
-
Lifetime warranty against manufacturing defects
