Product Description
Mark-10 Series CTA Torque Tester Digimatic Interface Cable
Send data to our GageMux® gage interface or other Digimatic input devices
This FlashCable® gage interface is engineered to convert the output on the Mark-10 Series CTA Cap Torque Tester to a Digimatic format. The 9-pin female connector on this Advanced Systems & Designs FlashCable® connects directly to the male connector on the Mark-10 Series CTA Cap Torque Tester.
This FlashCable® gage interface is designed to work with our GageMux® gage interface or other similar devices that recognize the Mitutoyo Digimatic signal. The FlashCable® does not obtain any power from the Mark-10 Cap Torque Tester. When properly connected to our GageMux® interface, pin 9 of the 10-pin input port provides the power to the FlashCable® gage interface. On devices other than the GageMux®, pin 9 of the input port connector must provide a 5vDC power to the FlashCable®.
When the FlashCable® gage interface is powered by the GageMux® the LED on the FlashCable® turns solid GREEN. The LED briefly flashes RED when the data is being sent or a data request is triggered.
The data transfer can be triggered using any of the following methods:
-
Using the send data button on the Mark-10 Series CTA Cap Torque Tester
-
Using a Footswitch connected to our GageMux® USB or equivalent triggering methods
-
Using our 300-1S in-line handswitch
-
Using a Footswitch on the FlashCable® (not included)
-
Sending a read command from the external computer to the Mark-10 Cap Torque Tester
A detailed operation manual is included with this FlashCable® gage interface. As a default setting, Advanced Systems & Designs sets the FlashCable® gage interface to the default RS232 communication settings on the Mark-10 Series CTA Cap Torque Tester. The Mark-10 CTA Torque Tester and FlashCable® gage interface must be set to the same communication values. Refer to the Mark-10 Series CTA Cap Torque Tester user guide for more information on how to set-up RS232 external communication.
This FlashCable® gage interface comes in a six foot standard cable length. Special lengths are available upon request.
Details:
-
Digimatic output FlashCable® interface cable for the Mark-10 Series CTA Cap Torque Tester
-
Sends data to GageMux® gage interface or other devices that recognize the Digimatic Signal
-
Several options to trigger data
-
Special cable lengths available on request
-
Lifetime warranty against manufacturing defects
