Product Description
Mahr Digimar 817 CLM Quick Height Digimatic Interface Cable
Send data to our GageMux® gage interface or other Digimatic input devices
This FlashCable® gage interface is engineered to convert the output on the Mahr Digimar 817 CLM Quick Height to a Digimatic format. The 9-pin female connector on this Advanced Systems & Designs FlashCable® connects directly to the male connector on the Mahr Digimar 817 CLM Quick Height Display.
This FlashCable® gage interface is designed to work with our GageMux® gage interface or similar devices that recognize the Mitutoyo Digimatic signal. The FlashCable® does not obtain any power from the Mahr Digimar 817 CLM Quick Height Display. When properly connected to our GageMux® interface, pin 9 of the 10-pin input port provides the power to the FlashCable® gage interface. On devices other than the GageMux®, pin 9 of the input port connector must provide a 5vDC power to the FlashCable®. Contact us for more information on this requirement.
When the FlashCable® gage interface is powered by the GageMux® the LED on the FlashCable® turns solid GREEN. The LED briefly flashes RED when the data is being sent or a data request is triggered.
The data transfer can be triggered by the following method:
-
Using the DATA key on the Mahr Digimar 817 CLM Quick Height Display
A detailed operation manual is included with this FlashCable® gage interface. As a default setting, Advanced Systems & Designs sets the FlashCable® gage interface to the default RS232 communication settings on the Mahr Digimar 817 CLM Quick Height Display. The Mahr Digimar 817 CLM Quick Height Display and FlashCable® gage interface must be set to the same RS232 communication values. Refer to the Mahr Digimar 817 CLM Quick Height operating instructions for more information on how to set-up external communication using the RS-232C interface.
This FlashCable® gage interface comes in a six foot standard cable length. Special lengths are available upon request. Lifetime warranty against manufacturing defects.
Details:
-
Digimatic output FlashCable® interface cable for the Mahr Digimar 817 CLM Quick Height Display
-
Sends data to our GageMux® gage interface or other devices that recognize the Digimatic Signal
-
Uses the DATA key on the Mahr Digimar display to send data
-
Special cable lengths available on request
-
Lifetime warranty against manufacturing defects
