Product Description
Chatillon TCD Series Digital Force Tester Digimatic FlashCable®
Send data to our GageMux® gage interface or other Digimatic input devices
This FlashCable® gage interface is engineered to change the output on the Chatillon TCD 110 / 225 / 1100 Digital Force Tester to an output in a Mitutoyo Digimatic format. The female connector on the Advanced Systems & Designs FlashCable® gage interface connects directly to the 9-pin male RS232 output connector on the Chatillon TCD Digital Force Tester.
This FlashCable® interface is designed to work with our GageMux® gage interface or other similar devices that recognize the Mitutoyo Digimatic signal. The FlashCable® receives power from our GageMux® gage interface or other similar Digimatic input devices. If you are using devices, other than our GageMux® multiple input gage interface, make sure pin 9 of the 10-pin input connector provides a 5 volt DC supply to the FlashCable® interface cable. Please contact us for more information on how to perform a simple test for this requirement.
The LED on the FlashCable® will turn GREEN when properly connected to our GageMux® gage interface or other similar Digimatic input devices. The LED turns RED when the data is triggered or a data request is triggered.
The real-time data transfer can be triggered using any of the following methods:
-
Using the Print / Transmit button on the Chatillon TCD Digital Force Tester
This FlashCable® gage interface comes with a detailed operation manual. We normally set the FlashCable® gage interface to the default settings on the Chatillon TCD 225 Digital Force Tester. Make sure both the Chatillon TCD 225 Digital Force Tester is set to the default values or the values shown in the FlashCable® gage interface operating manual. Refer to the Chatillon TCD Digital Force Tester user guide for more information on how to establish RS232 external communication.
Six foot standard cable length with special lengths available upon request. Please contact us for more information. Lifetime warranty against manufacturing defects
Details:
-
Digimatic output FlashCable® for Chatillon TCD 225 Digital Force Tester
-
Sends data to GageMux® or devices that recognize the Digimatic signal
-
Lifetime warranty against manufacturing defects
-
Special cable lengths available on request
