Simplify your data acquisition process by using our 600-390-KB-USB ASDQMS SmartCable Keyboard and connect your Mitutoyo digital drop indicator to a computer. The Advanced Systems and Designs SmartCable Keyboard connects directly to the gage---no additional cables are required. The output of the SmartCable Keyboard gage interface is a standard USB 2.0 keyboard signal.

This is the ideal cable to use with the Mitutoyo drop indicator because it has a built-in data send button. Your data readings are accurate every time. There is also no need to add the expense of a separate footswitch---but if you want to use one, there is a footswitch port on the SmartCable box.

Connecting this SmartCable Keyboard with its built-in keyboard interface to a computer will allow your Mitutoyo digital drop indicator to be identified as a keyboard device that can send data to any Microsoft Windows application or SPC internet explorer software. There are no complicated software wedges required. Our SmartCable Keyboard never changes when your software updates.

This SmartCable Keyboard gage interface is easily configured to output data in different modes, such as CR, TAB, up, down, left, right continuous reading, continuous reading with automatic 10, 15, or 30 second delay between readings. We can also design a unique firmware for your special requirement. The output mode is selected by adjusting the rotary switch on the SmartCable Keyboard.

Readings can be triggered by pressing the push button on the SmartCable Keyboard gage interface, depressing a connected footswitch or by pressing the send button on the gage.

Click this LINK for more information.