Product Description
Beta LaserMike 2020 Laser BenchMike SmartCable™ USB with Keyboard Output
Send data directly to Excel---No Software Wedge Required
This Advanced Systems & Designs SmartCable™ USB Keyboard, single gage interface, connects the Beta LaserMike 2020 Laser BenchMike to a computer. Connects the LaserMike 2020 BenchMike to the SmartCable™ Keyboard using a 25-pin male cable connector---no additional cables required.
The output of the SmartCable™ Keyboard is a standard USB 2.0 keyboard signal. Connecting the SmartCable™ Keyboard with its built-in keyboard wedge to a computer will allow the SmartCable™ to be identified as a keyboard device that can send data to any Microsoft Windows application - no software wedge required.
The SmartCable™ Keyboard will make the Beta LaserMike 2020 readings appear as if they were typed in using a standard keyboard - eliminates data collection errors. If you want to collect data into a Microsoft Excel spreadsheet or Explorer based SPC programs, simply select the cell where you want the data to appear.
Readings can be triggered by the following:
-
Using the PRT/CAL button on the Beta LaserMike 2020 Laser BenchMike
-
Pressing the push button on the SmartCable™ Keyboard gage interface
-
Depressing a connected footswitch (not included)
Simple to use!
LED Indicator lights aid the user with the operation of the SmartCable™. This SmartCable™ Keyboard is easily configured to output data in different output modes on your spreadsheet, such as CR, TAB, up, down, left, or right. The output mode is selected by adjusting the rotary switch on the SmartCable™ Keyboard. To access the rotary switch, simply remove the top cover by loosening two Phillips screws. Six foot standard cable length with special lengths available upon request.
A detailed operation manual is included with this SmartCable™ Keyboard gage interface. The communication parameters can be changed and reconfigured per requirements for both the SmartCable™ and the Beta LaserMike 2020 Laser Bench Mike. Advanced Systems & Designs normally sets the SmartCable™ Keyboard to the default settings on the Beta Laser Bench Mike. Make sure both the SmartCable™ and Beta Laser Bench Mike are set to the same values. Refer to the Beta LaserMike 2020 Laser Bench Mike user manual for more information on external communication.
Features:
-
SmartCable™ Keyboard for Beta LaserMike 2020 Laser BenchMike
-
Sends data to Excel or other Explorer based SPC programs
-
Multiple data triggering options
-
Special cable lengths available on request
-
Lifetime warranty against manufacturing defects
